Welcome Guest [Log In] [Register]
Welcome to Exilian. We have moved! Any content you're looking for still exists, so don't worry. Come and join us at our new site:

http://exilian.co.uk/forum/

If you had an account here your user data and posts will all have been transferred, but login here to get your automated temporary password.

Username:   Password:
Add Reply
Safety operation rules for road milling machines; wpc floor
Topic Started: Sep 30 2016, 06:03:47 AM (5 Views)
qizhen0926
Royal Amourer
[ *  *  *  *  *  *  *  *  * ]
<h3>Maintenance of milling machine</h3>
<p>1、Road milling machine maintenance procedures, safety should take attention ,also work, and arson, etc., and protective equipment is necessary to wear during the maintenance process.</p>
<p>2、Without making special note, maintenance work should be done under the condition of the engine stopped running. </p>
<p> 3、Before starting maintenance, make sure the road milling machine will not be inadvertently activated, rotate or fall. </p>
<p>4、When cleaning the road milling body, not using flammable materials.</p>
<p> 5、When using high-pressure cleaners or steam spray device, it should be covered when water jet power components, insulation, ventilation equipment if necessary.</p>
<p>6、Several welding work must be note the following</p>
<p>(1)Turn off the power. </p>
<p>(2)Interrupts the power supply line </p>
<p>(3) Find adjustment of the measuring device (plug 2 × 2), the central control computer and the drive control using the power switch (2 × 1 plug) on your computer. And a switch (1 Double plug) 6 slave and engine control device with electrical power on the power supply should be disconnected.</p>
<p>4)Welder ground should be as far away from the solder joint.</p>
<p>7、 Change running diesel engine oil after 250 hours after the first time trial operation, replace after every 500 hours . 8, during the first oil filter 250 hours during a test run after the replacement, after no interval 500 hours to replace.</p>
<p>8、Change the oil filter after250 hours,replace every 500 hours.</p>
<p>9、Add a little lubrication for new fuel filter seal,full fill the fuel oil to filter before installing, for tightening.</p>
<p>10、Air filter every 50 hours to empty the dust collector, then the team with compressed air filter clean sweep.</p>
<p>11、Coolant filter need to be changed replaced every 1000 hours or one time every year.</p>


<p>Related Sites:<br />
High Power Advantages Of Bitumen Sprayer<br />
useful concrete paver<br />
Used Roadheaders Continuous Miners<br />
asphalt compactor price manufacturer
</p>
wpc pool deck
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Game Guides and Tutorials · Next Topic »
Add Reply