| Welcome to NYTHIRDGEN. We hope you enjoy your visit. You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free. Join our community! If you're already a member please log in to your account to access all of our features: |
| SPOHN K-MEMBER; What'ya guys think? | |
|---|---|
| Tweet Topic Started: Sep 24 2008, 11:29 AM (1,502 Views) | |
| admin_glen | Feb 17 2009, 02:49 PM Post #31 |
|
Founder <-----
|
Sure as long as you install my rear "cough" sway bar too. |
|
Instructions for posting a picture: http://s9.zetaboards.com/nythirdgen/topic/593945/1/ Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new For Donations and Merchandise orders paypal address is nythirdgen@live.com 1987 IROC 5.7 350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade | |
![]() |
|
| klowny | Feb 17 2009, 02:54 PM Post #32 |
![]()
Da Klownfather
|
Don't you mean MY bar in YOUR rear?
|
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| 83z283505spd | Feb 17 2009, 03:23 PM Post #33 |
|
Advanced Member
|
whoa. thats just not right.
|
![]() 1979 Pontiac Firebird Fromula - 406 TH350 | |
![]() |
|
| admin_glen | Feb 17 2009, 03:29 PM Post #34 |
|
Founder <-----
|
Effin greeks always trying to stick you from behind......
|
|
Instructions for posting a picture: http://s9.zetaboards.com/nythirdgen/topic/593945/1/ Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new For Donations and Merchandise orders paypal address is nythirdgen@live.com 1987 IROC 5.7 350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade | |
![]() |
|
| L98_Z28 | Feb 17 2009, 03:57 PM Post #35 |
![]()
OG
|
Guys, get the Fcuk back on topic.
|
|
1984 Celica Supra P-type: 5MGE/W58 Swap/4.10 LSD. 2nd owner. 1987 Toyota Xtracab 4x4 5MGE Swap, 5 speed swap, other stuffs. 1987 Toyota 4Runner Turbo: 22RTE/Auto. Digital Dash. SR5 Package, Inclinometer 1987 Nissan Maxima SE VG30E/5Speed. 216k. Suspension Techniques Lowering Springs, Suspension Techniques FSB, Addco RSB | |
![]() |
|
| charged355 | Feb 17 2009, 06:21 PM Post #36 |
|
Nythirdgen Founder
|
nice manny, looks like its a spring time tubular fiesta for me and you, i like the parts....how much were those struts for the front i might get new ones....but one thing....im not digin the red....sorry... |
![]() Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw | |
![]() |
|
| klowny | Feb 17 2009, 09:52 PM Post #37 |
![]()
Da Klownfather
|
tubular kmember fiesta I figured I'd do the red cause everything else under my car is red (torque arm, rear drag bar, rear lca's)..I'll see how it looks if it doesn't look good I can always shoot some black paint on it.. :lol: just the two front struts cost me $350..I attached the link... http://www.spohn.net/shop/1982-1992-GM-F-B...ront-Strut.html |
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| charged355 | Feb 17 2009, 10:30 PM Post #38 |
|
Nythirdgen Founder
|
wow 5 way ha, thats a little nutty so is that price...do they make anything cheaper then taht... |
![]() Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw | |
![]() |
|
| klowny | Feb 17 2009, 10:39 PM Post #39 |
![]()
Da Klownfather
|
are you looking for an adjustable shock? if not kyb's are a cheap alternative...that's what i have on now... or are you gonna go drag shocks? |
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| charged355 | Feb 17 2009, 10:52 PM Post #40 |
|
Nythirdgen Founder
|
what ya doin with ya old kyb ones....i have stokers now....i jus really dont have any money to spend on any more unnecessary shit...it has gotten outta control...i would like sumthing adjustable....but then again, i was gonna jus use my stock ones.... |
![]() Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw | |
![]() |
|
| klowny | Feb 17 2009, 11:29 PM Post #41 |
![]()
Da Klownfather
|
my old ones have been on the car for about 10 years..if they are still good u can have em....but you'd probably be better off spending 50 bucks to get new ones.. http://store.summitracing.com/partdetail.a...15&autoview=sku these are some of the struts and shocks for our cars....adjustables are pricey... http://store.summitracing.com/egnsearch.as...k=KeywordSearch |
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| admin_glen | Feb 18 2009, 08:47 AM Post #42 |
|
Founder <-----
|
These are the ones I got. http://store.summitracing.com/partdetail.a...15&autoview=sku Alex with all the weight taken out why would you need adjustables? |
|
Instructions for posting a picture: http://s9.zetaboards.com/nythirdgen/topic/593945/1/ Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new For Donations and Merchandise orders paypal address is nythirdgen@live.com 1987 IROC 5.7 350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade | |
![]() |
|
| charged355 | Feb 18 2009, 06:23 PM Post #43 |
|
Nythirdgen Founder
|
fine tuning glen fine tuning....but my bank account might only allow for well...nothing lol... |
![]() Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw | |
![]() |
|
| klowny | Feb 18 2009, 11:38 PM Post #44 |
![]()
Da Klownfather
|
money is overrated...
|
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| charged355 | Feb 19 2009, 06:26 PM Post #45 |
|
Nythirdgen Founder
|
until you have very little of it..... |
![]() Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw | |
![]() |
|
| klowny | Apr 23 2009, 01:02 PM Post #46 |
![]()
Da Klownfather
|
Ok...I know I spoke to a few of u guys and u wanted to know when I'm gonna start on this...well the time is here... I am gonna start this project on sunday afternoon and hopefully finish for tuesdays meet.. I will be doing the work in my garage so if u guys wanna swing by and watch me curse up a storm feel free to pass by. |
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| admin_glen | Apr 23 2009, 01:05 PM Post #47 |
|
Founder <-----
|
^Are you going to be wearing that lace thong with the rhinstones on it? Sam told me how good you look in it.... |
|
Instructions for posting a picture: http://s9.zetaboards.com/nythirdgen/topic/593945/1/ Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new For Donations and Merchandise orders paypal address is nythirdgen@live.com 1987 IROC 5.7 350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade | |
![]() |
|
| klowny | Apr 23 2009, 01:20 PM Post #48 |
![]()
Da Klownfather
|
For u glean, I will wear anything u want
|
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| rockjay81 | Apr 23 2009, 01:56 PM Post #49 |
|
The Real World Admin
|
i can stop by sunday pm me your address i forgot were u live lol |
http://photobucket.com/Bosss![]() crime pays for my bitches upgrades 1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe) | |
![]() |
|
| klowny | Apr 23 2009, 02:25 PM Post #50 |
![]()
Da Klownfather
|
Pm sent... I'm thinking I might start aroun 1 or 2 ..will keep ya posted |
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| charged355 | Apr 23 2009, 07:35 PM Post #51 |
|
Nythirdgen Founder
|
good luck gettin it done that fast.....i jus did it....and it aint fun at all....ill tell you that.... |
![]() Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw | |
![]() |
|
| klowny | Apr 23 2009, 07:41 PM Post #52 |
![]()
Da Klownfather
|
Yeah...I was trying to be optimistic...lol..I wonder if my neighbors will mind me using my impact gun in the middle if the night
|
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| black83zee | Apr 26 2009, 07:37 AM Post #53 |
![]()
Media Specialist
|
>Hell with impact gun noise!...what's getting them are the swear words coming from you trying to so the swap in the middle of the night! why so late? Def. want to see the ride tuesday! Let us know what happened! |
350, carb, headers, side exhaust, T-5, aluminum ds, Baer discs, Bilsteins, tubular a-arms, tubular torque arm, adjustable track bar and control arms. | |
![]() |
|
| klowny | Apr 26 2009, 12:14 PM Post #54 |
![]()
Da Klownfather
|
Hahahaa ... U right...I remember when I replaced my timing chain..it was 2 in the morning, I was tigtening down the timing cover bolts and snapped two bolts.. Let's just say I cursed so loud that I saw my next door neighbors lights go on inside their house Btw.. My fuel pump and starter both decided to take a shit so tuesday is highly unlikely I will bring the bitch
|
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| klowny | Apr 26 2009, 11:26 PM Post #55 |
![]()
Da Klownfather
|
Ok I'm efin pissed.. I have no effin time to work on the bitch..shit keeps on popping up...
|
|
Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods.. subscribe (its free to subscribe) and you will be updated on future projects: https://www.youtube.com/watch?v=6HO-D0aIgx8 https://www.youtube.com/watch?v=mIx1TqfXt6A Thanks! | |
![]() |
|
| black83zee | Apr 27 2009, 01:48 PM Post #56 |
![]()
Media Specialist
|
>Dude, I know what you mean! |
350, carb, headers, side exhaust, T-5, aluminum ds, Baer discs, Bilsteins, tubular a-arms, tubular torque arm, adjustable track bar and control arms. | |
![]() |
|
| admin_glen | Apr 27 2009, 01:53 PM Post #57 |
|
Founder <-----
|
Stop bichin and get to work. Since I noticed Manny has not posted today guess he finally working on his car. |
|
Instructions for posting a picture: http://s9.zetaboards.com/nythirdgen/topic/593945/1/ Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new For Donations and Merchandise orders paypal address is nythirdgen@live.com 1987 IROC 5.7 350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade | |
![]() |
|
| KJZ28/TA | Apr 27 2009, 02:45 PM Post #58 |
![]()
:p
|
That is what went through my head...I have looked at this thread everyday for pictures of progress....Hope there there tonight!!!!!!!!!!! |
![]() |
|
| admin_glen | Apr 27 2009, 02:47 PM Post #59 |
|
Founder <-----
|
You would think after 3 pages of posts he would at least have pulled a tire off....
|
|
Instructions for posting a picture: http://s9.zetaboards.com/nythirdgen/topic/593945/1/ Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new For Donations and Merchandise orders paypal address is nythirdgen@live.com 1987 IROC 5.7 350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade | |
![]() |
|
| Spade | Apr 27 2009, 04:01 PM Post #60 |
|
Undercover
|
i dont think manny will be taking any pics... |
Keeping it REAL since 1984
| |
![]() |
|
| 1 user reading this topic (1 Guest and 0 Anonymous) | |
![]() Our users say it best: "Zetaboards is the best forum service I have ever used." |
|
| Go to Next Page | |
| « Previous Topic · Aftermarket Product Review · Next Topic » |
| Theme: Zeta Original | Track Topic · E-mail Topic |
9:38 AM Jul 11
|















9:38 AM Jul 11