Welcome Guest [Log In] [Register]
Welcome to NYTHIRDGEN. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
  • Pages:
  • 1
Took the Camaro out today
Topic Started: Feb 8 2009, 05:44 PM (319 Views)
admin_glen
Member Avatar
Founder <-----
I go to start the car and yes as stated before the battery was dead. So I charged it for a half hour (father-in-law has a charger). Get ready to pull her out than it started raining.

Well I said Fcuk it and pulled her out. Figured I will take her for a run on the Grand Central Parkway to get a full charge and get that oil flowing.

Well the car was much to dirty so I got her washed. Looking so good I figured lets drive her some more; so off to the Northern State I went. The car ran great and there was absolutely no traffic. I could not asked for a better setting. So I am happy to say the car is running great for now....


Oh before I forget does anyone know the fine for driving 61 miles over the speed limit? :bang:

Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
Spade
Member Avatar
Undercover
Got a ticket Glean?

Keeping it REAL since 1984

Posted Image
Offline Profile Quote Post Goto Top
 
383irocguy
Newbie
man i wish i would of taken out my camaro but if i do i know ill just have to called a tow truck five minutes after taking it out
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Spade
Feb 8 2009, 05:54 PM
Got a ticket Glean?

:imwithstupid: :irochp:
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
L98_Z28
Member Avatar
OG
Glen, you wish your car can do 61 mph over the limit. :lol:
1984 Celica Supra P-type:
5MGE/W58 Swap/4.10 LSD. 2nd owner.
1987 Toyota Xtracab 4x4
5MGE Swap, 5 speed swap, other stuffs.
1987 Toyota 4Runner Turbo:
22RTE/Auto. Digital Dash. SR5 Package, Inclinometer
1987 Nissan Maxima SE
VG30E/5Speed. 216k. Suspension Techniques Lowering Springs, Suspension Techniques FSB, Addco RSB
Offline Profile Quote Post Goto Top
 
mucker15
Member Avatar
SUPER SKUNK
I had the TA out to day as well. it did feel great to get her going cant wait to do this all the time. I got a 102 in a 55 once it sucked. I just remember I was a point away from losing my license. I was in my boxer shorts wearing a cookie monster shirt at 230 am,, in my red mustang, had to learn the Ford lesson the hardway

its a long story......
Posted Image
Offline Profile Quote Post Goto Top
 
KJZ28/TA
Member Avatar
:p
I washed my car today, looks great........But I found out after trying to seal up some leaks, my t-tops AND firewall still leak!! AGHHHHH!!!

I love driving this car so much, handles awesome, its pretty quite, looks cool...but I might get rid of it if I cant find these leaks, its my DD and I cant deal with not driving in the rain!! Or not being able to wash the car!
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
61mph over the limit? you can get your car impounded bro lol cops dont care i ran my baby today with open headders and i got pulled over 3 times today for the noise and 5% tint. luckly i just ended the day with a head ache form the noise lol :ph43r:
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
BigEd65
Member Avatar
what can i modify next ?
I am jealous, mine is in the storage unit for two weeks now, I still haven't visited her. I was gonna go get her today but instead i went upstate and blew off some steam

with my AR15 & Beretta 12 guage - 400 rounds later I feel much better

:alex: :alex: :alex: :alex: :alex: :ED:

92 Black Z28 5.7 ZZ4, HSR, Trickflow 195s, TPIS 409 cam, Dyno Dons, BBK 58mm, Ram Air, NOS, Level 10 built 700r4 ProTorque 3200 stall, LEDs, 4th Gen leather, Custom Tune by gp90gta, Megashifter, Full MSD Ignition, UMI SFC, K-member, A-arms , Spohn Panhard Bar, LCA's, Torque Arm, Crossmember & 25mm Sway bar, TDS wonderbar, Edelbrock modified STB, 3.73 Moser 12 bolt, BBK Fuel Pump, Moog springs and Bilsteins all around and March Revolver pulley system, Wilwood full Big Brake Kit and Master Cylinder ..... I give up .... lots of sh!t oh yeah a full Sport Comp gauge package

92 White Z28 5.0 Stock T-Tops


Posted Image
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
we should set up something for a sunday were we go cruising on the highway i cant make the hooters on tuesdays because i work night shifts so im assed out
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
klowny
Member Avatar
Da Klownfather
Glean dont you have any pba cards??

I spent the whole day in my garage cursing and screaming putting my offset lca's in the rear..I also wacked my finger with a hammer and i think my nail is about to come off....Did i mention i hate cars? :angry:



Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods..
subscribe (its free to subscribe) and you will be updated on future projects:

https://www.youtube.com/watch?v=6HO-D0aIgx8

https://www.youtube.com/watch?v=mIx1TqfXt6A

Thanks!
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Nope no PBA cards... With a mini van I did not need it anymore.....

Jason what time did you take your car out?
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
like 1230 or so im going there today i gotta get the exhaust done its tooooooo loud
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Shit we just missed each other. I was there around the same time.
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
lol damm well lmk if you are going to be around later. after i get the exhaust done im going to do my taxes. call me if you want my cell is 347-756-2530
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
I am at work till 4 then home. Not allowed to play with my car during the week...

I like sleeping in a warm bed :D
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
klowny
Member Avatar
Da Klownfather
^ 'oldman'



Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods..
subscribe (its free to subscribe) and you will be updated on future projects:

https://www.youtube.com/watch?v=6HO-D0aIgx8

https://www.youtube.com/watch?v=mIx1TqfXt6A

Thanks!
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
^ it is more like this 'whiped'
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
klowny
Member Avatar
Da Klownfather
:rofl2:



Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods..
subscribe (its free to subscribe) and you will be updated on future projects:

https://www.youtube.com/watch?v=6HO-D0aIgx8

https://www.youtube.com/watch?v=mIx1TqfXt6A

Thanks!
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
just got back i had a bad day.... my exhaust guy sed the shorties cant run the true dual set up i want and the tax place was packed im just gona let her sit in the parking spot until i can figure out how to get the long tubes on bc of the stupid starter in the way.


you cant play with your car on week days lol my wife knows better
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
What shorties do you have? And I have a great tax guy if you need one
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
http://store.summitracing.com/partdetail.a...15&autoview=sku

i got these shorites thanks for the tax guy im going back there tomorrow real early. plusi gotta get all my baby mommas together so i can claim them kids lmao j.k
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
duke
Member Avatar
rattle canner
i try to drive my car every weekend, but was tempted to take off the t-tops
Offline Profile Quote Post Goto Top
 
Spade
Member Avatar
Undercover
i was so close to do it today.. its not even funny.... especially now that the headliners looks great...
Keeping it REAL since 1984

Posted Image
Offline Profile Quote Post Goto Top
 
duke
Member Avatar
rattle canner
i love my headliner blowing in the wind. on the list of things to buy
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Does your exhaust guy do custom work? You should call Perry at 631.274.5248.

He is a little pricy but I know he could do the custom set up you want.
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
rockjay81
Member Avatar
The Real World Admin
my guy does but he is an old guy he doesnt want the car to bottom out and he is all about safety so he is a pain in the ass lol but i'll give your guy a call thanks bro im tired of the open headers its cool for a day or so but my head hurts :bang:
http://photobucket.com/Bosss

Posted Image
crime pays for my bitches upgrades

1984 Z28 6.0 Lsx, 4l60e trans, 2400, stall Detroit diff 3.73 gears, 4th gen interior (The black hoe)
Offline Profile Quote Post Goto Top
 
BigEd65
Member Avatar
what can i modify next ?
Wednesday is gonna be in the sixties - I feel a stomach flu coming on, I may have set the stage on tuesday

with my luck i'll call out and have a dead battery or flat

92 Black Z28 5.7 ZZ4, HSR, Trickflow 195s, TPIS 409 cam, Dyno Dons, BBK 58mm, Ram Air, NOS, Level 10 built 700r4 ProTorque 3200 stall, LEDs, 4th Gen leather, Custom Tune by gp90gta, Megashifter, Full MSD Ignition, UMI SFC, K-member, A-arms , Spohn Panhard Bar, LCA's, Torque Arm, Crossmember & 25mm Sway bar, TDS wonderbar, Edelbrock modified STB, 3.73 Moser 12 bolt, BBK Fuel Pump, Moog springs and Bilsteins all around and March Revolver pulley system, Wilwood full Big Brake Kit and Master Cylinder ..... I give up .... lots of sh!t oh yeah a full Sport Comp gauge package

92 White Z28 5.0 Stock T-Tops


Posted Image
Offline Profile Quote Post Goto Top
 
klowny
Member Avatar
Da Klownfather
rockjay81
Feb 9 2009, 10:26 PM
my guy does but he is an old guy he doesnt want the car to bottom out and he is all about safety so he is a pain in the ass lol but i'll give your guy a call thanks bro im tired of the open headers its cool for a day or so but my head hurts :bang:

Alot of regular mechanics i have met hate doing headers or any performance mods...shit I've seen people bring their cars to the dealer with problems, and the dealerships tells them they have to return everything back to stock before they attempt diagnosing the car..I fcuking hate regular mechanics, I've had many arguments with them....no offense to any regular mechanics out there..



Check out my thirdgen videos and technical how to vids...from basic car maintenance to Performance mods..
subscribe (its free to subscribe) and you will be updated on future projects:

https://www.youtube.com/watch?v=6HO-D0aIgx8

https://www.youtube.com/watch?v=mIx1TqfXt6A

Thanks!
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
^ What's your point?
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
Go to Next Page
« Previous Topic · Off Topic · Next Topic »
Add Reply
  • Pages:
  • 1

Black Water created by tiptopolive of the Zetaboards Theme Zone