Welcome Guest [Log In] [Register]
Welcome to NYTHIRDGEN. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Fog Lights / No Fog Lights
Topic Started: Feb 26 2012, 06:41 PM (506 Views)
Camaros4Life
Member Avatar
84' Camaro Conversion
I was thinking of adding Fog lights behind my billet grill. I wanted to use something from the aftermarket with either H4 bulbs or something semi brighter instead of the factory style ones. Anyone know where to get a nice set with mounting brackets? what would be the best way to install them with an aftermarket Fuse panel?
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
charged355
Member Avatar
Nythirdgen Founder
No; just blocks the tiny bit of airflow the rad gets.
Posted Image

Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz

http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw
Offline Profile Quote Post Goto Top
 
1320B4U
"Miley Cyrus Club Pres"
I also think no foglights simply b/c how your car is put together. W/the staggered rims, nice rake forward, it looks like a quarter mile terror, not a touring type setup. Putting things on like fogs or muddflaps takes away from the overall direction that car is built for imo. Personally, i'd do a cage painted yellow, external fuel pump w/on/off switch, etc...to finish it off, you know.
Posted Image

1991 R/S..1992 L98 Firehawk Tribute (sold)..1999 c5/t56 (sold)..2012 z-71
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
1320B4U
Feb 26 2012, 08:08 PM
I also think no foglights simply b/c how your car is put together. W/the staggered rims, nice rake forward, it looks like a quarter mile terror, not a touring type setup. Putting things on like fogs or muddflaps takes away from the overall direction that car is built for imo. Personally, i'd do a cage painted yellow, external fuel pump w/on/off switch, etc...to finish it off, you know.
I actually like the thought of this. I was thinking to help me see better though with the fog lights bc my night vision isnt the best
charged355
Feb 26 2012, 07:20 PM
No; just blocks the tiny bit of airflow the rad gets.
I have the 2 aux fans pushin air through as well. I updated my head lights to H4's but i still have a problem seeing sometimes at night. what would be the best way to improve the light output effectively?
Edited by Camaros4Life, Feb 26 2012, 10:51 PM.
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
charged355
Member Avatar
Nythirdgen Founder
Get a hid kit.
Posted Image

Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz

http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
charged355
Feb 27 2012, 08:41 AM
Get a hid kit.
Is there a plug and play harness that i could use for our style cars? also will i be able to utilize the H4 Bulb housings?
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Yes they are all plug and play now. Just be pickey on your housings. Get clear diamond cut

Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
admin_glen
Feb 27 2012, 10:13 AM
Yes they are all plug and play now. Just be pickey on your housings. Get clear diamond cut

I believe the ones i have now are clear Diamond cut.

Whats the best website to order the HID's off of. Will I still be able to use my highbeams as well? Will i be able to utilize my housing that i have and just buy the bulbs and Ballast?

Posted Image
Edited by Camaros4Life, Feb 27 2012, 10:24 AM.
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Aren't thouse headlights or they are alread the housings?

Call Brian 347-298-5094, this is who Ed, Al and myself got our lights from. Top quality and no concerns. Tell him you are from the club he should remember us
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
admin_glen
Feb 27 2012, 10:28 AM
Aren't thouse headlights or they are alread the housings?

Call Brian 347-298-5094, this is who Ed, Al and myself got our lights from. Top quality and no concerns. Tell him you are from the club he should remember us
Ill give that guy a call. They are the housing with the H4 bulbs installed in them for now. They are a little brighter, but do no project any more light then the factory bulbs.

Do you remember how much the cost was for the entire setup from him.

i will try and call that guy soon.
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
charged355
Member Avatar
Nythirdgen Founder
Just get a h4 hid kit, should be about 80bux
Posted Image

Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz

http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
charged355
Feb 27 2012, 10:39 AM
Just get a h4 hid kit, should be about 80bux
Thats what i have. I purchased the 4 housings with the 4 H4 bulbs. They are still not that much brighter then stock. I spent around $80 for them originally.
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Think they were like $80 for 8000 lumens

Here is his site

http://www.gothidxenon.com/

Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
K28
Member Avatar
ANTI-D.A.R.E
Go to Www.ddmtuning.com for your hid kit and it's only 35 bucks
1992 CAMARO Z28 305 TPI bone stock for now
2010 Jeep Grand Cherokee Larado
:irochp: SOLD-1987 CAMARO LT 305 EX DARE CAR-SOLD :irochp:
1996 T-bird R.I.P.

Posted Image

https://www.facebook.com/kenny.panaro
My Ebay Store
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
Ill check out both sites when I get home. Its the pain in the A$$ to look up stuff on my phone. Thanks guys
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
Spade
Member Avatar
Undercover
K28
Feb 27 2012, 11:24 AM
Go to Www.ddmtuning.com for your hid kit and it's only 35 bucks
:imwithstupid:

i have a new set from them... total including shipping would be 55 and they are great just ordered another set for the 'hoe
Keeping it REAL since 1984

Posted Image
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
The bulbs should fit the housings I have then correct? Or do I need to order a specific style bulb??
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
notagain
Member Avatar
still leaking =-)
im a fan of fog lights i like the way they look at night but in my opinion i wouldnt do it if i had your car
i like the clean look
Posted Image
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
notagain
Feb 27 2012, 01:11 PM
im a fan of fog lights i like the way they look at night but in my opinion i wouldnt do it if i had your car
i like the clean look
Me too, I then need to upgrade my headlights to HID's. My main concern is seeing better at night because my night vision isn't the best. The street lights do not help a lot either.
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
Your housings are fine. May need to remove the deflector caps
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
admin_glen
Feb 27 2012, 03:53 PM
Your housings are fine. May need to remove the deflector caps
Is that a simple fix? I never have taken the lenses apart. are they like screwed in place.

So im looking for a plug and play h4 Connector, HID bulbs with Ballast?
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
charged355
Member Avatar
Nythirdgen Founder
No do not take the reflector out, that's what gives better light output.
Posted Image

Custom Forged 355 / Solid roller cam/valvetrain / Victor Jr heads / Hurricane Intake/ Accufab 1250cfm Throttle body / MegaSquirt 3 Engine Managment/ 1000cc SouthBay Injectors/ 7.6:1 CR / 4" Custom Single Exhaust / 4000 Circle D Stall/ CK Performance Billet 4L80 FMVB Trans Brake / 3" Chromoly Driveshaft / Full UMI Tubular Rear Suspension / Moser/Strange 9" / 4:11 gears Detroit Locker / Sumped LS1 gas tank / A1000 Fuel pump / A1000 FPR / Paxton Fuel filter / -10 Fuel line -8 return / Borg Warner S475 Turbo @10psi/ JGS 50mm WG & 56mm BOV / PA Racing Complete Tubular Front End Kit With Coilovers / Full Autometer Dash / Custom Black Suade Guts / Built by yours truly/ Tuned by George the EFI whiz

http://www.youtube.com/channel/UCnxlPhzRElZYM5YE-n2NRUw
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
charged355
Feb 27 2012, 05:13 PM
No do not take the reflector out, that's what gives better light output.
Is there a shorter style HID bulb to use or the stock ones off of like DDMtuning will fit in nicely.
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
K28
Member Avatar
ANTI-D.A.R.E
Camaros4Life
Feb 28 2012, 11:15 AM
charged355
Feb 27 2012, 05:13 PM
No do not take the reflector out, that's what gives better light output.
Is there a shorter style HID bulb to use or the stock ones off of like DDMtuning will fit in nicely.
they should fit ... ive never heard of shorter hid bulbs
1992 CAMARO Z28 305 TPI bone stock for now
2010 Jeep Grand Cherokee Larado
:irochp: SOLD-1987 CAMARO LT 305 EX DARE CAR-SOLD :irochp:
1996 T-bird R.I.P.

Posted Image

https://www.facebook.com/kenny.panaro
My Ebay Store
Offline Profile Quote Post Goto Top
 
admin_glen
Member Avatar
Founder <-----
I had two stage HIDs that means when and if I used my high beams the lights stayed on.

Mind you, you will never need your high beams.

So you should be fine.

Just search for the kit that is made for your car.
Instructions for posting a picture:
http://s9.zetaboards.com/nythirdgen/topic/593945/1/

Welcome to any old and new members please remember we are here for you but we need your help to keep to club going. Please donate

http://s9.zetaboards.com/nythirdgen/topic/7437933/1/#new
For Donations and Merchandise orders paypal address is nythirdgen@live.com
:daughtry:

1987 IROC 5.7
350 engine swap, HSR, Southbay 36lb injectors, Hedman shorty headers and y-pipe, Magnaflow Hi-flow Catalytic, 3 inch Magnaflow Exhaust System with 3.5" tips, Front end suspension rebuilt, Energy suspension polyurethane control arm bushings, Energy suspension sway bar end links, Spohn Front end steering rebuild kit (Center link, inner and outer tie rod ends, idler arm), PST springs (front and rear), KYB struts(front) and KYB Gas-a-just shocks (rear), KYB strut mounts, UMI performance subframe connectors, BMR Strut Tower Brace, Astro Van Steering Shaft upgrade
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
K28 set me up with a list from DDMTuning that he installed on his car with the highs and lows. Thanks again K28
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
K28
Member Avatar
ANTI-D.A.R.E
No problem
1992 CAMARO Z28 305 TPI bone stock for now
2010 Jeep Grand Cherokee Larado
:irochp: SOLD-1987 CAMARO LT 305 EX DARE CAR-SOLD :irochp:
1996 T-bird R.I.P.

Posted Image

https://www.facebook.com/kenny.panaro
My Ebay Store
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
K28
Feb 28 2012, 06:46 PM
No problem
I just got done ordering them... WOOT
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
Camaros4Life
Member Avatar
84' Camaro Conversion
Lights are in, check them out http://s9.zetaboards.com/nythirdgen/topic/7307138/8/
Posted Image
Engine:
-350ci Small Block Chevy, Punched out .060 to make 360Ci, Speed Pro Flat top pistons --Edelbrock Ram Air 2 --Quick Fuel 750 DP --Patriot Performance Freedom Series Aluminum Heads: 2.02 / 1.60 --Comp Cams --Hooker Super Comp Shorty Headers --MSD HEI, 8.5mm Wires -- Champion 3 Core All Aluminum Radiator

Transmission / Driveshaft / Rearend / Suspension:
-Mad Dog Stage 3 700r4 --3in Custom Build Driveshaft --3.73 Built 4th Gen Posi --Upgraded C5 Front Disk Brakes --Subframe Connectors -- Full UMI / Spohn Suspension

Interior:
-Black Panels, Carpet, Headliner --4th Gen Black and Yellow Seats --B&M Mega Shifter --Autometer Gauges

Exterior:
-2010 Corvette Yellow --(91-92) Aero Ground Effects --3 Inch Cowl Hood --C6 Wheels --86 Firebird Spoiler --6000k HID's
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Body · Next Topic »
Add Reply

Black Water created by tiptopolive of the Zetaboards Theme Zone